Hex Bolt Manufacturer Introduces Hex Bolt


 Hex bolts have large contact faces and are used in com […]

 Hex bolts have large contact faces and are used in combination with tapered and spherical washers. They are mainly used for fixing two non-parallel parts.
 Advantages of hexagon bolts:
 1. Hex bolt can withstand high tensile, compressive, torsional and shear strength. Carbon steel flange is a good choice.
 2, the bolt connection is a fastener connection, compared to other connection methods, it has advantages, easy to assemble and disassemble, is conducive to overhaul, can increase the pre-tightening force to prevent loosening, will not cause a phase change of material composition at the joint
 3. The hexagonal bolt steel has good plasticity and low strength and becomes hard.
 Classification of hexagon bolts:
 1. Hex heads screw with hole bolt
 A split pinhole is formed on the screw through the wire hole, and the machine is mechanically loosened and secured against looseness.
 2, hexagonal head hole bolt
 The ream bolts accurately pin the mutual position of the linked parts and can withstand shear and squeezing in the transverse direction.
 Application of hexagon bolts:
 The head of the hex bolt consists of a hexagonal head and a flange face. This bolt can withstand higher preload and has better relaxation performance, and is widely used in automotive engines and heavy machinery.
 Hexagon heads with holes and cap bolts. When used, the bolts can be mechanically locked for reliable locking.
 The above is the introduction to the Hex Bolt Manufacturer of Haiyan Yihui Hexagon Bolt. If you have any doubts after reading the above article, please feel free to leave us a message.

Views: 604